|
|
|
PRECISION THERMISTOR
METER/ CONTROLLER
The INFC Series
combines the features of a controller, monitor and temperature limit
alarm into one easy-to-use digital meter for applications that require
maximum versatility. The INFCH accepts most popular thermistor
inputs such as Series 400 and 700 sensor inputs and has high accuracy.
Optional dual Form C relays for control or alarm are available. Relay
models offer the choice of linear or proportional analog output.
SPECIFICATIONS Input 44004 (2,252ohm), 44005 (3,000ohm), 44006 (10,000ohm), 44007 (5,000ohm), 44016 (10,000ohm) -112░ to 302░F, 44008 (30,000ohm) -40░F to 302░F, 44018, 700 Linear thermistor composite -22░F to 212░F (Resistance at 25░C) Outputs 2 Form C (SPDT) relays, rated 5 Amp 250 Vac; programmable for active high/low alarms with latching/non-latching relays. Relay Hysteresis: programmable from 0 to 9999. Accuracy: 0.2░C after 30 min. warm-up Temperature Coefficient: ▒50 PPM/░C Read Rate: 3/sec Step Response: 2 seconds Power: 115 Vac, 230 Vac, 10-32 Vdc, 26-56 Vdc; 6 Watts; 240 V RMS overvoltage protection Isolation: 1500 V peak per Hv test; 354 V peak per IEC spacing NMR: 60 dB CMR: 120 dB Operating Temperature: 0 to 50░C (32 to 140░F) Storage Temperature: -40 to 85░C (-40 to 185░F) Analog Output: Scalable 0-10 Vdc or 4-20 mA; optional Dimensions: 48 H x 96 W x 152 D mm (1.89" x 3.78" x 6.0") Panel Cutout: 45 x 92 W mm (1.772" x 3.622")
To Order (Specify Model No.) Prices Shown in U.S. Dollars
å Specify order code from Power and Display Codes chart. Ordering Example: INFCH-011, thermistor thermometer with optional dual relays and analog output, 115 Vac power, red LED display, $395. |